R FAQ


Next: , Previous: (dir), Up: (dir)

R FAQ

Frequently Asked Questions on R

Version 2.10.2009-10-23

ISBN 3-900051-08-9

Kurt Hornik



Next: , Previous: Top, Up: Top

1 Introduction

This document contains answers to some of the most frequently asked questions about R.


Next: , Previous: Introduction, Up: Introduction

1.1 Legalese

This document is copyright © 1998–2009 by Kurt Hornik.

This document is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.

This document is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

A copy of the GNU General Public License is available via WWW at

     http://www.gnu.org/copyleft/gpl.html.

You can also obtain it by writing to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, U.S.A.


Next: , Previous: Legalese, Up: Introduction

1.2 Obtaining this document

The latest version of this document is always available from

     http://CRAN.R-project.org/doc/FAQ/

From there, you can obtain versions converted to plain ASCII text, DVI, GNU info, HTML, PDF, PostScript as well as the Texinfo source used for creating all these formats using the GNU Texinfo system.

You can also obtain the R FAQ from the doc/FAQ subdirectory of a CRAN site (see What is CRAN?).


Next: , Previous: Obtaining this document, Up: Introduction

1.3 Citing this document

In publications, please refer to this FAQ as Hornik (2009), “The R FAQ”, and give the above, official URL and the ISBN 3-900051-08-9:

     @Misc{,
       author        = {Kurt Hornik},
       title         = {The {R} {FAQ}},
       year          = {2009},
       note          = {{ISBN} 3-900051-08-9},
       url           = {http://CRAN.R-project.org/doc/FAQ/R-FAQ.html}
     }


Next: , Previous: Citing this document, Up: Introduction

1.4 Notation

Everything should be pretty standard. `R>' is used for the R prompt, and a `$' for the shell prompt (where applicable).


Previous: Notation, Up: Introduction

1.5 Feedback

Feedback via email to Kurt.Hornik@R-project.org is of course most welcome.

In particular, note that I do not have access to Windows or Macintosh systems. Features specific to the Windows and Mac OS X ports of R are described in the “R for Windows FAQ and the “R for Mac OS X FAQ. If you have information on Macintosh or Windows systems that you think should be added to this document, please let me know.


Next: , Previous: Introduction, Up: Top

2 R Basics


Next: , Previous: R Basics, Up: R Basics

2.1 What is R?

R is a system for statistical computation and graphics. It consists of a language plus a run-time environment with graphics, a debugger, access to certain system functions, and the ability to run programs stored in script files.

The design of R has been heavily influenced by two existing languages: Becker, Chambers & Wilks' S (see What is S?) and Sussman's Scheme. Whereas the resulting language is very similar in appearance to S, the underlying implementation and semantics are derived from Scheme. See What are the differences between R and S?, for further details.

The core of R is an interpreted computer language which allows branching and looping as well as modular programming using functions. Most of the user-visible functions in R are written in R. It is possible for the user to interface to procedures written in the C, C++, or FORTRAN languages for efficiency. The R distribution contains functionality for a large number of statistical procedures. Among these are: linear and generalized linear models, nonlinear regression models, time series analysis, classical parametric and nonparametric tests, clustering and smoothing. There is also a large set of functions which provide a flexible graphical environment for creating various kinds of data presentations. Additional modules (“add-on packages”) are available for a variety of specific purposes (see R Add-On Packages).

R was initially written by Ross Ihaka and Robert Gentleman at the Department of Statistics of the University of Auckland in Auckland, New Zealand. In addition, a large group of individuals has contributed to R by sending code and bug reports.

Since mid-1997 there has been a core group (the “R Core Team”) who can modify the R source code archive. The group currently consists of Doug Bates, John Chambers, Peter Dalgaard, Robert Gentleman, Kurt Hornik, Stefano Iacus, Ross Ihaka, Friedrich Leisch, Thomas Lumley, Martin Maechler, Duncan Murdoch, Paul Murrell, Martyn Plummer, Brian Ripley, Duncan Temple Lang, Luke Tierney, and Simon Urbanek.

R has a home page at http://www.R-project.org/. It is free software distributed under a GNU-style copyleft, and an official part of the GNU project (“GNU S”).


Next: , Previous: What is R?, Up: R Basics

2.2 What machines does R run on?

R is being developed for the Unix, Windows and Mac families of operating systems. Support for Mac OS Classic ended with R 1.7.1.

The current version of R will configure and build under a number of common Unix platforms including cpu-linux-gnu for the i386, alpha, arm, hppa, ia64, m68k, mips/mipsel, powerpc, s390, sparc (e.g., http://buildd.debian.org/build.php?&pkg=r-base), and x86_64 CPUs, powerpc-apple-darwin, mips-sgi-irix, i386-freebsd, rs6000-ibm-aix, and sparc-sun-solaris.

If you know about other platforms, please drop us a note.


Next: , Previous: What machines does R run on?, Up: R Basics

2.3 What is the current version of R?

The current released version is 2.10.0. Based on this `major.minor.patchlevel' numbering scheme, there are two development versions of R, a patched version of the current release (`r-patched') and one working towards the next minor or eventually major (`r-devel') releases of R, respectively. Version r-patched is for bug fixes mostly. New features are typically introduced in r-devel.


Next: , Previous: What is the current version of R?, Up: R Basics

2.4 How can R be obtained?

Sources, binaries and documentation for R can be obtained via CRAN, the “Comprehensive R Archive Network” (see What is CRAN?).

Sources are also available via https://svn.R-project.org/R/, the R Subversion repository, but currently not via anonymous rsync (nor CVS).

Tarballs with daily snapshots of the r-devel and r-patched development versions of R can be found at ftp://ftp.stat.math.ethz.ch/Software/R.


Next: , Previous: How can R be obtained?, Up: R Basics

2.5 How can R be installed?


Next: , Previous: How can R be installed?, Up: How can R be installed?

2.5.1 How can R be installed (Unix)

If R is already installed, it can be started by typing R at the shell prompt (of course, provided that the executable is in your path).

If binaries are available for your platform (see Are there Unix binaries for R?), you can use these, following the instructions that come with them.

Otherwise, you can compile and install R yourself, which can be done very easily under a number of common Unix platforms (see What machines does R run on?). The file INSTALL that comes with the R distribution contains a brief introduction, and the “R Installation and Administration” guide (see What documentation exists for R?) has full details.

Note that you need a FORTRAN compiler or perhaps f2c in addition to a C compiler to build R. Also, you need Perl version 5 to build the R object documentations. (If this is not available on your system, you can obtain a PDF version of the object reference manual via CRAN.)

In the simplest case, untar the R source code, change to the directory thus created, and issue the following commands (at the shell prompt):

     $ ./configure
     $ make

If these commands execute successfully, the R binary and a shell script front-end called R are created and copied to the bin directory. You can copy the script to a place where users can invoke it, for example to /usr/local/bin. In addition, plain text help pages as well as HTML and LaTeX versions of the documentation are built.

Use make dvi to create DVI versions of the R manuals, such as refman.dvi (an R object reference index) and R-exts.dvi, the “R Extension Writers Guide”, in the doc/manual subdirectory. These files can be previewed and printed using standard programs such as xdvi and dvips. You can also use make pdf to build PDF (Portable Document Format) version of the manuals, and view these using e.g. Acrobat. Manuals written in the GNU Texinfo system can also be converted to info files suitable for reading online with Emacs or stand-alone GNU Info; use make info to create these versions (note that this requires Makeinfo version 4.5).

Finally, use make check to find out whether your R system works correctly.

You can also perform a “system-wide” installation using make install. By default, this will install to the following directories:

${prefix}/bin
the front-end shell script
${prefix}/man/man1
the man page
${prefix}/lib/R
all the rest (libraries, on-line help system, ...). This is the “R Home Directory” (R_HOME) of the installed system.

In the above, prefix is determined during configuration (typically /usr/local) and can be set by running configure with the option

     $ ./configure --prefix=/where/you/want/R/to/go

(E.g., the R executable will then be installed into /where/you/want/R/to/go/bin.)

To install DVI, info and PDF versions of the manuals, use make install-dvi, make install-info and make install-pdf, respectively.


Next: , Previous: How can R be installed (Unix), Up: How can R be installed?

2.5.2 How can R be installed (Windows)

The bin/windows directory of a CRAN site contains binaries for a base distribution and a large number of add-on packages from CRAN to run on Windows 2000 and later (including 64-bit versions of Windows) on ix86 and x86_64 chips. The Windows version of R was created by Robert Gentleman and Guido Masarotto, and is now being developed and maintained by Duncan Murdoch and Brian D. Ripley.

For most installations the Windows installer program will be the easiest tool to use.

See the “R for Windows FAQ for more details.


Previous: How can R be installed (Windows), Up: How can R be installed?

2.5.3 How can R be installed (Macintosh)

The bin/macosx directory of a CRAN site contains a standard Apple installer package inside a disk image named R.dmg. Once downloaded and executed, the installer will install the current non-developer release of R. RAqua is a native Mac OS X Darwin version of R with a R.app Mac OS X GUI. Inside bin/macosx/powerpc/contrib/x.y there are prebuilt binary packages (for powerpc version of Mac OS X) to be used with RAqua corresponding to the “x.y” release of R. The installation of these packages is available through the “Package” menu of the R.app GUI. This port of R for Mac OS X is maintained by Stefano Iacus. The “R for Mac OS X FAQ has more details.

The bin/macos directory of a CRAN site contains bin-hexed (hqx) and stuffit (sit) archives for a base distribution and a large number of add-on packages of R 1.7.1 to run under Mac OS 8.6 to Mac OS 9.2.2. This port of R for Macintosh is no longer supported.


Next: , Previous: How can R be installed?, Up: R Basics

2.6 Are there Unix binaries for R?

The bin/linux directory of a CRAN site contains the following packages.

CPU Versions Provider
Debian i386/amd64 etch-cran Johannes Ranke
i386 lenny-cran Johannes Ranke
Red Hat i386/x86_64 fedora8/fedora9/fedora10 Martyn Plummer
i386/x86_64 el4/el5 Bob Kinney
SuSE i586/x86_64 10.3/11.0/11.1 Detlef Steuer
Ubuntu i386 dapper/gutsy/hardy/intrepid Vincent Goulet
amd64 dapper/gutsy/hardy/intrepid Michael Rutter

Debian packages, maintained by Dirk Eddelbuettel and Doug Bates, have long been part of the Debian distribution, and can be accessed through APT, the Debian package maintenance tool. Use e.g. apt-get install r-base r-recommended to install the R environment and recommended packages. If you also want to build R packages from source, also run apt-get install r-base-dev to obtain the additional tools required for this. So-called “backports” of the current R packages for at least the stable distribution of Debian are provided by Johannes Ranke, and available from CRAN. See http://CRAN.R-project.org/bin/linux/debian/README for details on R Debian packages and installing the backports, which should also be suitable for other Debian derivatives. Native backports for Ubuntu are provided by Vincent Goulet and Michael Rutter.

On SUSE, you can set up an installation source for R within Yast by setting (e.g.)

     Protocol: HTTP
     Server name: software.openSUSE.org
     Directory: /download/home:/dsteuer/openSUSE_10.2/

With this setting, online updates will check for new versions of R.

The bin/solaris directory of a CRAN site contains binary packages for Solaris on the SPARC and x64 platforms, provided by Mithun Sridharan.

No other binary distributions are currently publically available via CRAN.

A “live” Linux distribution with a particular focus on R is Quantian, which provides a directly bootable and self-configuring “Live DVD” containing numerous applications of interests to scientists and researchers, including several hundred CRAN and Bioconductor packages, the “ESS” extensions for Emacs, the “JGR” Java GUI for R, the Ggobi visualization tool as well as several other R interfaces. The Quantian website at http://dirk.eddelbuettel.com/quantian/ contains more details as well download information.


Next: , Previous: Are there Unix binaries for R?, Up: R Basics

2.7 What documentation exists for R?

Online documentation for most of the functions and variables in R exists, and can be printed on-screen by typing help(name) (or ?name) at the R prompt, where name is the name of the topic help is sought for. (In the case of unary and binary operators and control-flow special forms, the name may need to be be quoted.)

This documentation can also be made available as one reference manual for on-line reading in HTML and PDF formats, and as hardcopy via LaTeX, see How can R be installed?. An up-to-date HTML version is always available for web browsing at http://stat.ethz.ch/R-manual/.

Printed copies of the R reference manual for some version(s) are available from Network Theory Ltd, at http://www.network-theory.co.uk/R/base/. For each set of manuals sold, the publisher donates USD 10 to the R Foundation (see What is the R Foundation?).

The R distribution also comes with the following manuals.

An annotated bibliography (BibTeX format) of R-related publications can be found at

     http://www.R-project.org/doc/bib/R.bib

Books on R by R Core Team members include

John M. Chambers (2008), “Software for Data Analysis: Programming with R”. Springer, New York, ISBN 978-0-387-75935-7, http://stat.stanford.edu/~jmc4/Rbook/.

Peter Dalgaard (2008), “Introductory Statistics with R”, 2nd edition. Springer, ISBN 978-0-387-79053-4, http://www.biostat.ku.dk/~pd/ISwR.html.

Robert Gentleman (2008), “R Programming for Bioinformatics”. Chapman & Hall/CRC, Boca Raton, FL, ISBN 978-1-420-06367-7, http://www.bioconductor.org/pub/RBioinf/.

Stefano M. Iacus (2008), “Simulation and Inference for Stochastic Differential Equations: With R Examples”. Springer, New York, ISBN 978-0-387-75838-1.

Deepayan Sarkar (2007), “Lattice: Multivariate Data Visualization with R”. Springer, New York, ISBN 978-0-387-75968-5.

W. John Braun and Duncan J. Murdoch (2007), “A First Course in Statistical Programming with R”. Cambridge University Press, Cambridge, ISBN 978-0521872652.

P. Murrell (2005), “R Graphics”, Chapman & Hall/CRC, ISBN: 1-584-88486-X, http://www.stat.auckland.ac.nz/~paul/RGraphics/rgraphics.html.

William N. Venables and Brian D. Ripley (2002), “Modern Applied Statistics with S” (4th edition). Springer, ISBN 0-387-95457-0, http://www.stats.ox.ac.uk/pub/MASS4/.

Jose C. Pinheiro and Douglas M. Bates (2000), “Mixed-Effects Models in S and S-Plus”. Springer, ISBN 0-387-98957-0.

Last, but not least, Ross' and Robert's experience in designing and implementing R is described in Ihaka & Gentleman (1996), “R: A Language for Data Analysis and Graphics”, Journal of Computational and Graphical Statistics, 5, 299–314.


Next: , Previous: What documentation exists for R?, Up: R Basics

2.8 Citing R

To cite R in publications, use

     @Manual{,
       title        = {R: A Language and Environment for Statistical
                       Computing},
       author       = {{R Development Core Team}},
       organization = {R Foundation for Statistical Computing},
       address      = {Vienna, Austria},
       year         = 2009,
       note         = {{ISBN} 3-900051-07-0},
       url          = {http://www.R-project.org}
     }

Citation strings (or BibTeX entries) for R and R packages can also be obtained by citation().


Next: , Previous: Citing R, Up: R Basics

2.9 What mailing lists exist for R?

Thanks to Martin Maechler, there are four mailing lists devoted to R.

R-announce
A moderated list for major announcements about the development of R and the availability of new code.
R-packages
A moderated list for announcements on the availability of new or enhanced contributed packages.
R-help
The `main' R mailing list, for discussion about problems and solutions using R, announcements (not covered by `R-announce' and `R-packages') about the development of R and the availability of new code.
R-devel
This list is for questions and discussion about code development in R.

Please read the posting guide before sending anything to any mailing list.

Note in particular that R-help is intended to be comprehensible to people who want to use R to solve problems but who are not necessarily interested in or knowledgeable about programming. Questions likely to prompt discussion unintelligible to non-programmers (e.g., questions involving C or C++) should go to R-devel.

Convenient access to information on these lists, subscription, and archives is provided by the web interface at http://stat.ethz.ch/mailman/listinfo/. One can also subscribe (or unsubscribe) via email, e.g. to R-help by sending `subscribe' (or `unsubscribe') in the body of the message (not in the subject!) to R-help-request@lists.R-project.org.

Send email to R-help@lists.R-project.org to send a message to everyone on the R-help mailing list. Subscription and posting to the other lists is done analogously, with `R-help' replaced by `R-announce', `R-packages', and `R-devel', respectively. Note that the R-announce and R-packages lists are gatewayed into R-help. Hence, you should subscribe to either of them only in case you are not subscribed to R-help.

It is recommended that you send mail to R-help rather than only to the R Core developers (who are also subscribed to the list, of course). This may save them precious time they can use for constantly improving R, and will typically also result in much quicker feedback for yourself.

Of course, in the case of bug reports it would be very helpful to have code which reliably reproduces the problem. Also, make sure that you include information on the system and version of R being used. See R Bugs for more details.

See http://www.R-project.org/mail.html for more information on the R mailing lists.

The R Core Team can be reached at R-core@lists.R-project.org for comments and reports.

Many of the R project's mailing lists are also available via Gmane, from which they can be read with a web browser, using an NNTP news reader, or via RSS feeds. See http://dir.gmane.org/index.php?prefix=gmane.comp.lang.r. for the available mailing lists, and http://www.gmane.org/rss.php for details on RSS feeds.


Next: , Previous: What mailing lists exist for R?, Up: R Basics

2.10 What is CRAN?

The “Comprehensive R Archive Network” (CRAN) is a collection of sites which carry identical material, consisting of the R distribution(s), the contributed extensions, documentation for R, and binaries.

The CRAN master site at Wirtschaftsuniversität Wien, Austria, can be found at the URL

http://CRAN.R-project.org/

Daily mirrors are available at URLs including

http://cran.at.R-project.org/ (WU Wien, Austria)
http://cran.au.R-project.org/ (PlanetMirror, Australia)
http://cran.br.R-project.org/ (Universidade Federal do Paraná, Brazil)
http://cran.ch.R-project.org/ (ETH Zürich, Switzerland)
http://cran.dk.R-project.org/ (SunSITE, Denmark)
http://cran.es.R-project.org/ (Spanish National Research Network, Madrid, Spain)
http://cran.fr.R-project.org/ (INRA, Toulouse, France)
http://cran.pt.R-project.org/ (Universidade do Porto, Portugal)
http://cran.uk.R-project.org/ (U of Bristol, United Kingdom)
http://cran.za.R-project.org/ (Rhodes U, South Africa)

See http://CRAN.R-project.org/mirrors.html for a complete list of mirrors. Please use the CRAN site closest to you to reduce network load.

From CRAN, you can obtain the latest official release of R, daily snapshots of R (copies of the current source trees), as gzipped and bzipped tar files, a wealth of additional contributed code, as well as prebuilt binaries for various operating systems (Linux, Mac OS Classic, Mac OS X, and MS Windows). CRAN also provides access to documentation on R, existing mailing lists and the R Bug Tracking system.

To “submit” to CRAN, simply upload to ftp://CRAN.R-project.org/incoming/ and send an email to CRAN@R-project.org. Note that CRAN generally does not accept submissions of precompiled binaries due to security reasons. In particular, binary packages for Windows and Mac OS X are provided by the respective binary package maintainers.

Note: It is very important that you indicate the copyright (license) information (GPL-2, GPL-3, BSD, Artistic, ...) in your submission.

Please always use the URL of the master site when referring to CRAN.


Next: , Previous: What is CRAN?, Up: R Basics

2.11 Can I use R for commercial purposes?

R is released under the GNU General Public License (GPL) version 2. If you have any questions regarding the legality of using R in any particular situation you should bring it up with your legal counsel. We are in no position to offer legal advice.

It is the opinion of the R Core Team that one can use R for commercial purposes (e.g., in business or in consulting). The GPL, like all Open Source licenses, permits all and any use of the package. It only restricts distribution of R or of other programs containing code from R. This is made clear in clause 6 (“No Discrimination Against Fields of Endeavor”) of the Open Source Definition:

The license must not restrict anyone from making use of the program in a specific field of endeavor. For example, it may not restrict the program from being used in a business, or from being used for genetic research.

It is also explicitly stated in clause 0 of the GPL, which says in part

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program.

Most add-on packages, including all recommended ones, also explicitly allow commercial use in this way. A few packages are restricted to “non-commercial use”; you should contact the author to clarify whether these may be used or seek the advice of your legal counsel.

None of the discussion in this section constitutes legal advice. The R Core Team does not provide legal advice under any circumstances.


Next: , Previous: Can I use R for commercial purposes?, Up: R Basics

2.12 Why is R named R?

The name is partly based on the (first) names of the first two R authors (Robert Gentleman and Ross Ihaka), and partly a play on the name of the Bell Labs language `S' (see What is S?).


Next: , Previous: Why is R named R?, Up: R Basics

2.13 What is the R Foundation?

The R Foundation is a not for profit organization working in the public interest. It was founded by the members of the R Core Team in order to provide support for the R project and other innovations in statistical computing, provide a reference point for individuals, institutions or commercial enterprises that want to support or interact with the R development community, and to hold and administer the copyright of R software and documentation. See http://www.R-project.org/foundation/ for more information.


Previous: What is the R Foundation?, Up: R Basics

2.14 What is R-Forge?

R-Forge (http://R-Forge.R-project.org/) offers a central platform for the development of R packages, R-related software and further projects. It is based on GForge offering easy access to the best in SVN, daily built and checked packages, mailing lists, bug tracking, message boards/forums, site hosting, permanent file archival, full backups, and total web-based administration. For more information, see the R-Forge web page and Stefan Theußl and Achim Zeileis (2009), “Collaborative software development using R-Forge”, The R Journal, 1(1):9–14.


Next: , Previous: R Basics, Up: Top

3 R and S


Next: , Previous: R and S, Up: R and S

3.1 What is S?

S is a very high level language and an environment for data analysis and graphics. In 1998, the Association for Computing Machinery (ACM) presented its Software System Award to John M. Chambers, the principal designer of S, for

the S system, which has forever altered the way people analyze, visualize, and manipulate data ...

S is an elegant, widely accepted, and enduring software system, with conceptual integrity, thanks to the insight, taste, and effort of John Chambers.

The evolution of the S language is characterized by four books by John Chambers and coauthors, which are also the primary references for S.

See http://cm.bell-labs.com/cm/ms/departments/sia/S/history.html for further information on “Stages in the Evolution of S”.

There is a huge amount of user-contributed code for S, available at the S Repository at CMU.


Next: , Previous: What is S?, Up: R and S

3.2 What is S-Plus?

S-Plus is a value-added version of S sold by Insightful Corporation, which in 2008 was acquired by TIBCO Software Inc. See the Insightful S-Plus page and the TIBCO Spotfire S+ Products page for further information.


Next: , Previous: What is S-PLUS?, Up: R and S

3.3 What are the differences between R and S?

We can regard S as a language with three current implementations or “engines”, the “old S engine” (S version 3; S-Plus 3.x and 4.x), the “new S engine” (S version 4; S-Plus 5.x and above), and R. Given this understanding, asking for “the differences between R and S” really amounts to asking for the specifics of the R implementation of the S language, i.e., the difference between the R and S engines.

For the remainder of this section, “S” refers to the S engines and not the S language.


Next: , Previous: What are the differences between R and S?, Up: What are the differences between R and S?

3.3.1 Lexical scoping

Contrary to other implementations of the S language, R has adopted an evaluation model in which nested function definitions are lexically scoped. This is analogous to the evaluation model in Scheme.

This difference becomes manifest when free variables occur in a function. Free variables are those which are neither formal parameters (occurring in the argument list of the function) nor local variables (created by assigning to them in the body of the function). In S, the values of free variables are determined by a set of global variables (similar to C, there is only local and global scope). In R, they are determined by the environment in which the function was created.

Consider the following function:

     cube <- function(n) {
       sq <- function() n * n
       n * sq()
     }

Under S, sq() does not “know” about the variable n unless it is defined globally:

     S> cube(2)
     Error in sq():  Object "n" not found
     Dumped
     S> n <- 3
     S> cube(2)
     [1] 18

In R, the “environment” created when cube() was invoked is also looked in:

     R> cube(2)
     [1] 8

As a more “interesting” real-world problem, suppose you want to write a function which returns the density function of the r-th order statistic from a sample of size n from a (continuous) distribution. For simplicity, we shall use both the cdf and pdf of the distribution as explicit arguments. (Example compiled from various postings by Luke Tierney.)

The S-Plus documentation for call() basically suggests the following:

     dorder <- function(n, r, pfun, dfun) {
       f <- function(x) NULL
       con <- round(exp(lgamma(n + 1) - lgamma(r) - lgamma(n - r + 1)))
       PF <- call(substitute(pfun), as.name("x"))
       DF <- call(substitute(dfun), as.name("x"))
       f[[length(f)]] <-
         call("*", con,
              call("*", call("^", PF, r - 1),
                   call("*", call("^", call("-", 1, PF), n - r),
                        DF)))
       f
     }

Rather tricky, isn't it? The code uses the fact that in S, functions are just lists of special mode with the function body as the last argument, and hence does not work in R (one could make the idea work, though).

A version which makes heavy use of substitute() and seems to work under both S and R is

     dorder <- function(n, r, pfun, dfun) {
       con <- round(exp(lgamma(n + 1) - lgamma(r) - lgamma(n - r + 1)))
       eval(substitute(function(x) K * PF(x)^a * (1 - PF(x))^b * DF(x),
                       list(PF = substitute(pfun), DF = substitute(dfun),
                            a = r - 1, b = n - r, K = con)))
     }

(the eval() is not needed in S).

However, in R there is a much easier solution:

     dorder <- function(n, r, pfun, dfun) {
       con <- round(exp(lgamma(n + 1) - lgamma(r) - lgamma(n - r + 1)))
       function(x) {
         con * pfun(x)^(r - 1) * (1 - pfun(x))^(n - r) * dfun(x)
       }
     }

This seems to be the “natural” implementation, and it works because the free variables in the returned function can be looked up in the defining environment (this is lexical scope).

Note that what you really need is the function closure, i.e., the body along with all variable bindings needed for evaluating it. Since in the above version, the free variables in the value function are not modified, you can actually use it in S as well if you abstract out the closure operation into a function MC() (for “make closure”):

     dorder <- function(n, r, pfun, dfun) {
       con <- round(exp(lgamma(n + 1) - lgamma(r) - lgamma(n - r + 1)))
       MC(function(x) {
            con * pfun(x)^(r - 1) * (1 - pfun(x))^(n - r) * dfun(x)
          },
          list(con = con, pfun = pfun, dfun = dfun, r = r, n = n))
     }

Given the appropriate definitions of the closure operator, this works in both R and S, and is much “cleaner” than a substitute/eval solution (or one which overrules the default scoping rules by using explicit access to evaluation frames, as is of course possible in both R and S).

For R, MC() simply is

     MC <- function(f, env) f

(lexical scope!), a version for S is

     MC <- function(f, env = NULL) {
       env <- as.list(env)
       if (mode(f) != "function")
         stop(paste("not a function:", f))
       if (length(env) > 0 && any(names(env) == ""))
         stop(paste("not all arguments are named:", env))
       fargs <- if(length(f) > 1) f[1:(length(f) - 1)] else NULL
       fargs <- c(fargs, env)
       if (any(duplicated(names(fargs))))
         stop(paste("duplicated arguments:", paste(names(fargs)),
              collapse = ", "))
       fbody <- f[length(f)]
       cf <- c(fargs, fbody)
       mode(cf) <- "function"
       return(cf)
     }

Similarly, most optimization (or zero-finding) routines need some arguments to be optimized over and have other parameters that depend on the data but are fixed with respect to optimization. With R scoping rules, this is a trivial problem; simply make up the function with the required definitions in the same environment and scoping takes care of it. With S, one solution is to add an extra parameter to the function and to the optimizer to pass in these extras, which however can only work if the optimizer supports this.

Nested lexically scoped functions allow using function closures and maintaining local state. A simple example (taken from Abelson and Sussman) is obtained by typing demo("scoping") at the R prompt. Further information is provided in the standard R reference “R: A Language for Data Analysis and Graphics” (see What documentation exists for R?) and in Robert Gentleman and Ross Ihaka (2000), “Lexical Scope and Statistical Computing”, Journal of Computational and Graphical Statistics, 9, 491–508.

Nested lexically scoped functions also imply a further major difference. Whereas S stores all objects as separate files in a directory somewhere (usually .Data under the current directory), R does not. All objects in R are stored internally. When R is started up it grabs a piece of memory and uses it to store the objects. R performs its own memory management of this piece of memory, growing and shrinking its size as needed. Having everything in memory is necessary because it is not really possible to externally maintain all relevant “environments” of symbol/value pairs. This difference also seems to make R faster than S.

The down side is that if R crashes you will lose all the work for the current session. Saving and restoring the memory “images” (the functions and data stored in R's internal memory at any time) can be a bit slow, especially if they are big. In S this does not happen, because everything is saved in disk files and if you crash nothing is likely to happen to them. (In fact, one might conjecture that the S developers felt that the price of changing their approach to persistent storage just to accommodate lexical scope was far too expensive.) Hence, when doing important work, you might consider saving often (see How can I save my workspace?) to safeguard against possible crashes. Other possibilities are logging your sessions, or have your R commands stored in text files which can be read in using source().

Note: If you run R from within Emacs (see R and Emacs), you can save the contents of the interaction buffer to a file and conveniently manipulate it using ess-transcript-mode, as well as save source copies of all functions and data used.


Next: , Previous: Lexical scoping, Up: What are the differences between R and S?

3.3.2 Models

There are some differences in the modeling code, such as


Previous: Models, Up: What are the differences between R and S?

3.3.3 Others

Apart from lexical scoping and its implications, R follows the S language definition in the Blue and White Books as much as possible, and hence really is an “implementation” of S. There are some intentional differences where the behavior of S is considered “not clean”. In general, the rationale is that R should help you detect programming errors, while at the same time being as compatible as possible with S.

Some known differences are the following.

There are also differences which are not intentional, and result from missing or incorrect code in R. The developers would appreciate hearing about any deficiencies you may find (in a written report fully documenting the difference as you see it). Of course, it would be useful if you were to implement the change yourself and make sure it works.


Next: , Previous: What are the differences between R and S?, Up: R and S

3.4 Is there anything R can do that S-Plus cannot?

Since almost anything you can do in R has source code that you could port to S-Plus with little effort there will never be much you can do in R that you couldn't do in S-Plus if you wanted to. (Note that using lexical scoping may simplify matters considerably, though.)

R offers several graphics features that S-Plus does not, such as finer handling of line types, more convenient color handling (via palettes), gamma correction for color, and, most importantly, mathematical annotation in plot texts, via input expressions reminiscent of TeX constructs. See the help page for plotmath, which features an impressive on-line example. More details can be found in Paul Murrell and Ross Ihaka (2000), “An Approach to Providing Mathematical Annotation in Plots”, Journal of Computational and Graphical Statistics, 9, 582–599.


Previous: Is there anything R can do that S-PLUS cannot?, Up: R and S

3.5 What is R-plus?

For a very long time, there was no such thing.

XLSolutions Corporation is currently beta testing a commercially supported version of R named R+ (read R plus).

REvolution Computing has released REvolution R, an enterprise-class statistical analysis system based on R, suitable for deployment in professional, commercial and regulated environments.

Random Technologies offers RStat, an enterprise-strength statistical computing environment which combines R with enterprise-level validation, documentation, software support, and consulting services, as well as related R-based products.

See also http://en.wikipedia.org/wiki/R_programming_language#Commercialized_versions_of_R for pointers to commercialized versions of R.


Next: , Previous: R and S, Up: Top

4 R Web Interfaces

Rweb is developed and maintained by Jeff Banfield. The Rweb Home Page provides access to all three versions of Rweb—a simple text entry form that returns output and graphs, a more sophisticated JavaScript version that provides a multiple window environment, and a set of point and click modules that are useful for introductory statistics courses and require no knowledge of the R language. All of the Rweb versions can analyze Web accessible datasets if a URL is provided.

The paper “Rweb: Web-based Statistical Analysis”, providing a detailed explanation of the different versions of Rweb and an overview of how Rweb works, was published in the Journal of Statistical Software (http://www.jstatsoft.org/v04/i01/).

Ulf Bartel has developed R-Online, a simple on-line programming environment for R which intends to make the first steps in statistical programming with R (especially with time series) as easy as possible. There is no need for a local installation since the only requirement for the user is a JavaScript capable browser. See http://osvisions.com/r-online/ for more information.

Rcgi is a CGI WWW interface to R by MJ Ray. It had the ability to use “embedded code”: you could mix user input and code, allowing the HTML author to do anything from load in data sets to enter most of the commands for users without writing CGI scripts. Graphical output was possible in PostScript or GIF formats and the executed code was presented to the user for revision. However, it is not clear if the project is still active. Currently, a modified version of Rcgi by Mai Zhou (actually, two versions: one with (bitmap) graphics and one without) as well as the original code are available from http://www.ms.uky.edu/~statweb/.

CGI-based web access to R is also provided at http://hermes.sdu.dk/cgi-bin/go/. There are many additional examples of web interfaces to R which basically allow to submit R code to a remote server, see for example the collection of links available from http://biostat.mc.vanderbilt.edu/twiki/bin/view/Main/StatCompCourse.

David Firth has written CGIwithR, an R add-on package available from CRAN. It provides some simple extensions to R to facilitate running R scripts through the CGI interface to a web server, and allows submission of data using both GET and POST methods. It is easily installed using Apache under Linux and in principle should run on any platform that supports R and a web server provided that the installer has the necessary security permissions. David's paper “CGIwithR: Facilities for Processing Web Forms Using R” was published in the Journal of Statistical Software (http://www.jstatsoft.org/v08/i10/). The package is now maintained by Duncan Temple Lang and has a web page at http://www.omegahat.org/CGIwithR/.

Rpad, developed and actively maintained by Tom Short, provides a sophisticated environment which combines some of the features of the previous approaches with quite a bit of JavaScript, allowing for a GUI-like behavior (with sortable tables, clickable graphics, editable output), etc.

Jeff Horner is working on the R/Apache Integration Project which embeds the R interpreter inside Apache 2 (and beyond). A tutorial and presentation are available from the project web page at http://biostat.mc.vanderbilt.edu/twiki/bin/view/Main/RApacheProject.

Rserve is a project actively developed by Simon Urbanek. It implements a TCP/IP server which allows other programs to use facilities of R. Clients are available from the web site for Java and C++ (and could be written for other languages that support TCP/IP sockets).

OpenStatServer is being developed by a team lead by Greg Warnes; it aims “to provide clean access to computational modules defined in a variety of computational environments (R, SAS, Matlab, etc) via a single well-defined client interface” and to turn computational services into web services.

Two projects use PHP to provide a web interface to R. R_PHP_Online by Steve Chen (though it is unclear if this project is still active) is somewhat similar to the above Rcgi and Rweb. R-php is actively developed by Alfredo Pontillo and Angelo Mineo and provides both a web interface to R and a set of pre-specified analyses that need no R code input.

webbioc is “an integrated web interface for doing microarray analysis using several of the Bioconductor packages” and is designed to be installed at local sites as a shared computing resource.

Finally, Rwui is a web application to to create user-friendly web interfaces for R scripts. All code for the web interface is created automatically. There is no need for the user to do any extra scripting or learn any new scripting techniques.


Next: , Previous: R Web Interfaces, Up: Top

5 R Add-On Packages


Next: , Previous: R Add-On Packages, Up: R Add-On Packages

5.1 Which add-on packages exist for R?


Next: , Previous: Which add-on packages exist for R?, Up: Which add-on packages exist for R?

5.1.1 Add-on packages in R

The R distribution comes with the following packages:

base
Base R functions (and datasets before R 2.0.0).
datasets
Base R datasets (added in R 2.0.0).
grDevices
Graphics devices for base and grid graphics (added in R 2.0.0).
graphics
R functions for base graphics.
grid
A rewrite of the graphics layout capabilities, plus some support for interaction.
methods
Formally defined methods and classes for R objects, plus other programming tools, as described in the Green Book.
splines
Regression spline functions and classes.
stats
R statistical functions.
stats4
Statistical functions using S4 classes.
tcltk
Interface and language bindings to Tcl/Tk GUI elements.
tools
Tools for package development and administration.
utils
R utility functions.
These “base packages” were substantially reorganized in R 1.9.0. The former base was split into the four packages base, graphics, stats, and utils. Packages ctest, eda, modreg, mva, nls, stepfun and ts were merged into stats, package lqs returned to the recommended package MASS, and package mle moved to stats4.


Next: , Previous: Add-on packages in R, Up: Which add-on packages exist for R?

5.1.2 Add-on packages from CRAN

The CRAN src/contrib area contains a wealth of add-on packages, including the following recommended packages which are to be included in all binary distributions of R.

KernSmooth
Functions for kernel smoothing (and density estimation) corresponding to the book “Kernel Smoothing” by M. P. Wand and M. C. Jones, 1995.
MASS
Functions and datasets from the main package of Venables and Ripley, “Modern Applied Statistics with S”. (Contained in the VR bundle for R versions prior to 2.10.0.)
Matrix
A Matrix package. (Recommended for R 2.9.0 or later.)
boot
Functions and datasets for bootstrapping from the book “Bootstrap Methods and Their Applications” by A. C. Davison and D. V. Hinkley, 1997, Cambridge University Press.
class
Functions for classification (k-nearest neighbor and LVQ). (Contained in the VR bundle for R versions prior to 2.10.0.)
cluster
Functions for cluster analysis.
codetools
Code analysis tools. (Recommended for R 2.5.0 or later.)
foreign
Functions for reading and writing data stored by statistical software like Minitab, S, SAS, SPSS, Stata, Systat, etc.
lattice
Lattice graphics, an implementation of Trellis Graphics functions.
mgcv
Routines for GAMs and other generalized ridge regression problems with multiple smoothing parameter selection by GCV or UBRE.
nlme
Fit and compare Gaussian linear and nonlinear mixed-effects models.
nnet
Software for single hidden layer perceptrons (“feed-forward neural networks”), and for multinomial log-linear models. (Contained in the VR bundle for R versions prior to 2.10.0.)
rpart
Recursive PARTitioning and regression trees.
spatial
Functions for kriging and point pattern analysis from “Modern Applied Statistics with S” by W. Venables and B. Ripley. (Contained in the VR bundle for R versions prior to 2.10.0.)
survival
Functions for survival analysis, including penalized likelihood.
See the CRAN contributed packages page for more information.

Many of these packages are categorized into CRAN Task Views, allowing to browse packages by topic and providing tools to automatically install all packages for special areas of interest.

Some CRAN packages that do not build out of the box on Windows, require additional software, or are shipping third party libraries for Windows cannot be made available on CRAN in form of a Windows binary packages. Nevertheless, some of these packages are available at the “CRAN extras” repository at http://www.stats.ox.ac.uk/pub/RWin/ kindly provided by Brian D. Ripley. Note that this repository is a default repository for recent versions of R for Windows.


Next: , Previous: Add-on packages from CRAN, Up: Which add-on packages exist for R?

5.1.3 Add-on packages from Omegahat

The Omega Project for Statistical Computing provides a variety of open-source software for statistical applications, with special emphasis on web-based software, Java, the Java virtual machine, and distributed computing. A CRAN style R package repository is available via http://www.omegahat.org/R/. See http://www.omegahat.org/ for information on most R packages available from the Omega project.


Next: , Previous: Add-on packages from Omegahat, Up: Which add-on packages exist for R?

5.1.4 Add-on packages from Bioconductor

Bioconductor is an open source and open development software project for the analysis and comprehension of genomic data. Most Bioconductor components are distributed as R add-on packages. Initially most of the Bioconductor software packages focused primarily on DNA microarray data analysis. As the project has matured, the functional scope of the software packages broadened to include the analysis of all types of genomic data, such as SAGE, sequence, or SNP data. In addition, there are metadata (annotation, CDF and probe) and experiment data packages. See http://www.bioconductor.org/download/ for available packages and a complete taxonomy via BioC Views.


Previous: Add-on packages from Bioconductor, Up: Which add-on packages exist for R?

5.1.5 Other add-on packages

Many more packages are available from places other than the three default repositories discussed above (CRAN, Bioconductor and Omegahat). In particular, R-Forge provides a CRAN style repository at http://R-Forge.R-project.org/.

More code has been posted to the R-help mailing list, and can be obtained from the mailing list archive.


Next: , Previous: Which add-on packages exist for R?, Up: R Add-On Packages

5.2 How can add-on packages be installed?

(Unix only.) The add-on packages on CRAN come as gzipped tar files named pkg_version.tar.gz, which may in fact be “bundles” containing more than one package. Let path be the path to such a package file. Provided that tar and gzip are available on your system, type

     $ R CMD INSTALL path/pkg_version.tar.gz

at the shell prompt to install to the library tree rooted at the first directory in your library search path (see the help page for .libPaths() for details on how the search path is determined).

To install to another tree (e.g., your private one), use

     $ R CMD INSTALL -l lib path/pkg_version.tar.gz

where lib gives the path to the library tree to install to.

Even more conveniently, you can install and automatically update packages from within R if you have access to repositories such as CRAN. See the help page for available.packages() for more information.


Next: , Previous: How can add-on packages be installed?, Up: R Add-On Packages

5.3 How can add-on packages be used?

To find out which additional packages are available on your system, type

     library()

at the R prompt.

This produces something like

          Packages in `/home/me/lib/R':
          
          mystuff       My own R functions, nicely packaged but not documented
          
          Packages in `/usr/local/lib/R/library':
          
          KernSmooth    Functions for kernel smoothing for Wand & Jones (1995)
          MASS          Main Package of Venables and Ripley's MASS
          Matrix        Sparse and Dense Matrix Classes and Methods
          base          The R Base package
          boot          Bootstrap R (S-Plus) Functions (Canty)
          class         Functions for Classification
          cluster       Functions for clustering (by Rousseeuw et al.)
          codetools     Code Analysis Tools for R
          datasets      The R Datasets Package
          foreign       Read Data Stored by Minitab, S, SAS, SPSS, Stata, Systat,
                        dBase, ...
          grDevices     The R Graphics Devices and Support for Colours and Fonts
          graphics      The R Graphics Package
          grid          The Grid Graphics Package
          lattice       Lattice Graphics
          methods       Formal Methods and Classes
          mgcv          GAMs with GCV/AIC/REML smoothness estimation and GAMMs
                        by PQL
          nlme          Linear and Nonlinear Mixed Effects Models
          nnet          Feed-forward Neural Networks and Multinomial Log-Linear
                        Models
          rpart         Recursive Partitioning
          spatial       Functions for Kriging and Point Pattern Analysis
          splines       Regression Spline Functions and Classes
          stats         The R Stats Package
          stats4        Statistical functions using S4 Classes
          survival      Survival analysis, including penalised likelihood
          tcltk         Tcl/Tk Interface
          tools         Tools for Package Development
          utils         The R Utils Package
     

You can “load” the installed package pkg by

     library(pkg)

You can then find out which functions it provides by typing one of

     library(help = pkg)
     help(package = pkg)

You can unload the loaded package pkg by

     detach("package:pkg")


Next: , Previous: How can add-on packages be used?, Up: R Add-On Packages

5.4 How can add-on packages be removed?

Use

     $ R CMD REMOVE pkg_1 ... pkg_n

to remove the packages pkg_1, ..., pkg_n from the library tree rooted at the first directory given in R_LIBS if this is set and non-null, and from the default library otherwise. (Versions of R prior to 1.3.0 removed from the default library by default.)

To remove from library lib, do

     $ R CMD REMOVE -l lib pkg_1 ... pkg_n


Next: , Previous: How can add-on packages be removed?, Up: R Add-On Packages

5.5 How can I create an R package?

A package consists of a subdirectory containing a file DESCRIPTION and the subdirectories R, data, demo, exec, inst, man, po, src, and tests (some of which can be missing). The package subdirectory may also contain files INDEX, NAMESPACE, configure, cleanup, LICENSE, LICENCE, COPYING and NEWS.

See Creating R packages, for details.

R version 1.3.0 has added the function package.skeleton() which will set up directories, save data and code, and create skeleton help files for a set of R functions and datasets.

See What is CRAN?, for information on uploading a package to CRAN.


Previous: How can I create an R package?, Up: R Add-On Packages

5.6 How can I contribute to R?

R is in active development and there is always a risk of bugs creeping in. Also, the developers do not have access to all possible machines capable of running R. So, simply using it and communicating problems is certainly of great value.

The R Developer Page acts as an intermediate repository for more or less finalized ideas and plans for the R statistical system. It contains (pointers to) TODO lists, RFCs, various other writeups, ideas lists, and SVN miscellanea.


Next: , Previous: R Add-On Packages, Up: Top

6 R and Emacs


Next: , Previous: R and Emacs, Up: R and Emacs

6.1 Is there Emacs support for R?

There is an Emacs package called ESS (“Emacs Speaks Statistics”) which provides a standard interface between statistical programs and statistical processes. It is intended to provide assistance for interactive statistical programming and data analysis. Languages supported include: S dialects (R, S 3/4, and S-Plus 3.x/4.x/5.x/6.x/7.x), LispStat dialects (XLispStat, ViSta), SAS, Stata, and BUGS.

ESS grew out of the need for bug fixes and extensions to S-mode 4.8 (which was a GNU Emacs interface to S/S-Plus version 3 only). The current set of developers desired support for XEmacs, R, S4, and MS Windows. In addition, with new modes being developed for R, Stata, and SAS, it was felt that a unifying interface and framework for the user interface would benefit both the user and the developer, by helping both groups conform to standard Emacs usage. The end result is an increase in efficiency for statistical programming and data analysis, over the usual tools.

R support contains code for editing R source code (syntactic indentation and highlighting of source code, partial evaluations of code, loading and error-checking of code, and source code revision maintenance) and documentation (syntactic indentation and highlighting of source code, sending examples to running ESS process, and previewing), interacting with an inferior R process from within Emacs (command-line editing, searchable command history, command-line completion of R object and file names, quick access to object and search lists, transcript recording, and an interface to the help system), and transcript manipulation (recording and saving transcript files, manipulating and editing saved transcripts, and re-evaluating commands from transcript files).

The latest stable version of ESS are available via CRAN or the ESS web page. The HTML version of the documentation can be found at http://stat.ethz.ch/ESS/.

ESS comes with detailed installation instructions.

For help with ESS, send email to ESS-help@stat.math.ethz.ch.

Please send bug reports and suggestions on ESS to ESS-bugs@stat.math.ethz.ch. The easiest way to do this from is within Emacs by typing M-x ess-submit-bug-report or using the [ESS] or [iESS] pulldown menus.


Next: , Previous: Is there Emacs support for R?, Up: R and Emacs

6.2 Should I run R from within Emacs?

Yes, definitely. Inferior R mode provides a readline/history mechanism, object name completion, and syntax-based highlighting of the interaction buffer using Font Lock mode, as well as a very convenient interface to the R help system.

Of course, it also integrates nicely with the mechanisms for editing R source using Emacs. One can write code in one Emacs buffer and send whole or parts of it for execution to R; this is helpful for both data analysis and programming. One can also seamlessly integrate with a revision control system, in order to maintain a log of changes in your programs and data, as well as to allow for the retrieval of past versions of the code.

In addition, it allows you to keep a record of your session, which can also be used for error recovery through the use of the transcript mode.

To specify command line arguments for the inferior R process, use C-u M-x R for starting R.


Previous: Should I run R from within Emacs?, Up: R and Emacs

6.3 Debugging R from within Emacs

To debug R “from within Emacs”, there are several possibilities. To use the Emacs GUD (Grand Unified Debugger) library with the recommended debugger GDB, type M-x gdb and give the path to the R binary as argument. At the gdb prompt, set R_HOME and other environment variables as needed (using e.g. set env R_HOME /path/to/R/, but see also below), and start the binary with the desired arguments (e.g., run --quiet).

If you have ESS, you can do C-u M-x R <RET> - d <SPC> g d b <RET> to start an inferior R process with arguments -d gdb.

A third option is to start an inferior R process via ESS (M-x R) and then start GUD (M-x gdb) giving the R binary (using its full path name) as the program to debug. Use the program ps to find the process number of the currently running R process then use the attach command in gdb to attach it to that process. One advantage of this method is that you have separate *R* and *gud-gdb* windows. Within the *R* window you have all the ESS facilities, such as object-name completion, that we know and love.

When using GUD mode for debugging from within Emacs, you may find it most convenient to use the directory with your code in it as the current working directory and then make a symbolic link from that directory to the R binary. That way .gdbinit can stay in the directory with the code and be used to set up the environment and the search paths for the source, e.g. as follows:

     set env R_HOME /opt/R
     set env R_PAPERSIZE letter
     set env R_PRINTCMD lpr
     dir /opt/R/src/appl
     dir /opt/R/src/main
     dir /opt/R/src/nmath
     dir /opt/R/src/unix


Next: , Previous: R and Emacs, Up: Top

7 R Miscellanea


Next: , Previous: R Miscellanea, Up: R Miscellanea

7.1 How can I set components of a list to NULL?

You can use

     x[i] <- list(NULL)

to set component i of the list x to NULL, similarly for named components. Do not set x[i] or x[[i]] to NULL, because this will remove the corresponding component from the list.

For dropping the row names of a matrix x, it may be easier to use rownames(x) <- NULL, similarly for column names.


Next: , Previous: How can I set components of a list to NULL?, Up: R Miscellanea

7.2 How can I save my workspace?

save.image() saves the objects in the user's .GlobalEnv to the file .RData in the R startup directory. (This is also what happens after q("yes").) Using save.image(file) one can save the image under a different name.


Next: , Previous: How can I save my workspace?, Up: R Miscellanea

7.3 How can I clean up my workspace?

To remove all objects in the currently active environment (typically .GlobalEnv), you can do

     rm(list = ls(all = TRUE))

(Without all = TRUE, only the objects with names not starting with a `.' are removed.)


Next: , Previous: How can I clean up my workspace?, Up: R Miscellanea

7.4 How can I get eval() and D() to work?

Strange things will happen if you use eval(print(x), envir = e) or D(x^2, "x"). The first one will either tell you that "x" is not found, or print the value of the wrong x. The other one will likely return zero if x exists, and an error otherwise.

This is because in both cases, the first argument is evaluated in the calling environment first. The result (which should be an object of mode "expression" or "call") is then evaluated or differentiated. What you (most likely) really want is obtained by “quoting” the first argument upon surrounding it with expression(). For example,

     R> D(expression(x^2), "x")
     2 * x

Although this behavior may initially seem to be rather strange, is perfectly logical. The “intuitive” behavior could easily be implemented, but problems would arise whenever the expression is contained in a variable, passed as a parameter, or is the result of a function call. Consider for instance the semantics in cases like

     D2 <- function(e, n) D(D(e, n), n)

or

     g <- function(y) eval(substitute(y), sys.frame(sys.parent(n = 2)))
     g(a * b)

See the help page for deriv() for more examples.


Next: , Previous: How can I get eval() and D() to work?, Up: R Miscellanea

7.5 Why do my matrices lose dimensions?

When a matrix with a single row or column is created by a subscripting operation, e.g., row <- mat[2, ], it is by default turned into a vector. In a similar way if an array with dimension, say, 2 x 3 x 1 x 4 is created by subscripting it will be coerced into a 2 x 3 x 4 array, losing the unnecessary dimension. After much discussion this has been determined to be a feature.

To prevent this happening, add the option drop = FALSE to the subscripting. For example,

     rowmatrix <- mat[2, , drop = FALSE]  # creates a row matrix
     colmatrix <- mat[, 2, drop = FALSE]  # creates a column matrix
     a <- b[1, 1, 1, drop = FALSE]        # creates a 1 x 1 x 1 array

The drop = FALSE option should be used defensively when programming. For example, the statement

     somerows <- mat[index, ]

will return a vector rather than a matrix if index happens to have length 1, causing errors later in the code. It should probably be rewritten as

     somerows <- mat[index, , drop = FALSE]


Next: , Previous: Why do my matrices lose dimensions?, Up: R Miscellanea

7.6 How does autoloading work?

R has a special environment called .AutoloadEnv. Using autoload(name, pkg), where name and pkg are strings giving the names of an object and the package containing it, stores some information in this environment. When R tries to evaluate name, it loads the corresponding package pkg and reevaluates name in the new package's environment.

Using this mechanism makes R behave as if the package was loaded, but does not occupy memory (yet).

See the help page for autoload() for a very nice example.


Next: , Previous: How does autoloading work?, Up: R Miscellanea

7.7 How should I set options?

The function options() allows setting and examining a variety of global “options” which affect the way in which R computes and displays its results. The variable .Options holds the current values of these options, but should never directly be assigned to unless you want to drive yourself crazy—simply pretend that it is a “read-only” variable.

For example, given

     test1 <- function(x = pi, dig = 3) {
       oo <- options(digits = dig); on.exit(options(oo));
       cat(.Options$digits, x, "\n")
     }
     test2 <- function(x = pi, dig = 3) {
       .Options$digits <- dig
       cat(.Options$digits, x, "\n")
     }

we obtain:

     R> test1()
     3 3.14
     R> test2()
     3 3.141593

What is really used is the global value of .Options, and using options(OPT = VAL) correctly updates it. Local copies of .Options, either in .GlobalEnv or in a function environment (frame), are just silently disregarded.


Next: , Previous: How should I set options?, Up: R Miscellanea

7.8 How do file names work in Windows?

As R uses C-style string handling, `\' is treated as an escape character, so that for example one can enter a newline as `\n'. When you really need a `\', you have to escape it with another `\'.

Thus, in filenames use something like "c:\\data\\money.dat". You can also replace `\' by `/' ("c:/data/money.dat").


Next: , Previous: How do file names work in Windows?, Up: R Miscellanea

7.9 Why does plotting give a color allocation error?

On an X11 device, plotting sometimes, e.g., when running demo("image"), results in “Error: color allocation error”. This is an X problem, and only indirectly related to R. It occurs when applications started prior to R have used all the available colors. (How many colors are available depends on the X configuration; sometimes only 256 colors can be used.)

One application which is notorious for “eating” colors is Netscape. If the problem occurs when Netscape is running, try (re)starting it with either the -no-install (to use the default colormap) or the -install (to install a private colormap) option.

You could also set the colortype of X11() to "pseudo.cube" rather than the default "pseudo". See the help page for X11() for more information.


Next: , Previous: Why does plotting give a color allocation error?, Up: R Miscellanea

7.10 How do I convert factors to numeric?

It may happen that when reading numeric data into R (usually, when reading in a file), they come in as factors. If f is such a factor object, you can use

     as.numeric(as.character(f))

to get the numbers back. More efficient, but harder to remember, is

     as.numeric(levels(f))[as.integer(f)]

In any case, do not call as.numeric() or their likes directly for the task at hand (as as.numeric() or unclass() give the internal codes).


Next: , Previous: How do I convert factors to numeric?, Up: R Miscellanea

7.11 Are Trellis displays implemented in R?

The recommended package lattice (which is based on another recommended package, grid) provides graphical functionality that is compatible with most Trellis commands.

You could also look at coplot() and dotchart() which might do at least some of what you want. Note also that the R version of pairs() is fairly general and provides most of the functionality of splom(), and that R's default plot method has an argument asp allowing to specify (and fix against device resizing) the aspect ratio of the plot.

(Because the word “Trellis” has been claimed as a trademark we do not use it in R. The name “lattice” has been chosen for the R equivalent.)


Next: , Previous: Are Trellis displays implemented in R?, Up: R Miscellanea

7.12 What are the enclosing and parent environments?

Inside a function you may want to access variables in two additional environments: the one that the function was defined in (“enclosing”), and the one it was invoked in (“parent”).

If you create a function at the command line or load it in a package its enclosing environment is the global workspace. If you define a function f() inside another function g() its enclosing environment is the environment inside g(). The enclosing environment for a function is fixed when the function is created. You can find out the enclosing environment for a function f() using environment(f).

The “parent” environment, on the other hand, is defined when you invoke a function. If you invoke lm() at the command line its parent environment is the global workspace, if you invoke it inside a function f() then its parent environment is the environment inside f(). You can find out the parent environment for an invocation of a function by using parent.frame() or sys.frame(sys.parent()).

So for most user-visible functions the enclosing environment will be the global workspace, since that is where most functions are defined. The parent environment will be wherever the function happens to be called from. If a function f() is defined inside another function g() it will probably be used inside g() as well, so its parent environment and enclosing environment will probably be the same.

Parent environments are important because things like model formulas need to be evaluated in the environment the function was called from, since that's where all the variables will be available. This relies on the parent environment being potentially different with each invocation.

Enclosing environments are important because a function can use variables in the enclosing environment to share information with other functions or with other invocations of itself (see the section on lexical scoping). This relies on the enclosing environment being the same each time the function is invoked. (In C this would be done with static variables.)

Scoping is hard. Looking at examples helps. It is particularly instructive to look at examples that work differently in R and S and try to see why they differ. One way to describe the scoping differences between R and S is to say that in S the enclosing environment is always the global workspace, but in R the enclosing environment is wherever the function was created.


Next: , Previous: What are the enclosing and parent environments?, Up: R Miscellanea

7.13 How can I substitute into a plot label?

Often, it is desired to use the value of an R object in a plot label, e.g., a title. This is easily accomplished using paste() if the label is a simple character string, but not always obvious in case the label is an expression (for refined mathematical annotation). In such a case, either use parse() on your pasted character string or use substitute() on an expression. For example, if ahat is an estimator of your parameter a of interest, use

     title(substitute(hat(a) == ahat, list(ahat = ahat)))

(note that it is `==' and not `='). Sometimes bquote() gives a more compact form, e.g.,

     title(bquote(hat(a) = .(ahat)))

where subexpressions enclosed in `.()' are replaced by their values.

There are more worked examples in the mailing list archives.


Next: , Previous: How can I substitute into a plot label?, Up: R Miscellanea

7.14 What are valid names?

When creating data frames using data.frame() or read.table(), R by default ensures that the variable names are syntactically valid. (The argument check.names to these functions controls whether variable names are checked and adjusted by make.names() if needed.)

To understand what names are “valid”, one needs to take into account that the term “name” is used in several different (but related) ways in the language:

  1. A syntactic name is a string the parser interprets as this type of expression. It consists of letters, numbers, and the dot and (for version of R at least 1.9.0) underscore characters, and starts with either a letter or a dot not followed by a number. Reserved words are not syntactic names.
  2. An object name is a string associated with an object that is assigned in an expression either by having the object name on the left of an assignment operation or as an argument to the assign() function. It is usually a syntactic name as well, but can be any non-empty string if it is quoted (and it is always quoted in the call to assign()).
  3. An argument name is what appears to the left of the equals sign when supplying an argument in a function call (for example, f(trim=.5)). Argument names are also usually syntactic names, but again can be anything if they are quoted.
  4. An element name is a string that identifies a piece of an object (a component of a list, for example.) When it is used on the right of the `$' operator, it must be a syntactic name, or quoted. Otherwise, element names can be any strings. (When an object is used as a database, as in a call to eval() or attach(), the element names become object names.)
  5. Finally, a file name is a string identifying a file in the operating system for reading, writing, etc. It really has nothing much to do with names in the language, but it is traditional to call these strings file “names”.


Next: , Previous: What are valid names?, Up: R Miscellanea

7.15 Are GAMs implemented in R?

Package gam from CRAN implements all the Generalized Additive Models (GAM) functionality as described in the GAM chapter of the White Book. In particular, it implements backfitting with both local regression and smoothing splines, and is extendable. There is a gam() function for GAMs in package mgcv, but it is not an exact clone of what is described in the White Book (no lo() for example). Package gss can fit spline-based GAMs too. And if you can accept regression splines you can use glm(). For Gaussian GAMs you can use bruto() from package mda.


Next: , Previous: Are GAMs implemented in R?, Up: R Miscellanea

7.16 Why is the output not printed when I source() a file?

Most R commands do not generate any output. The command

     1+1

computes the value 2 and returns it; the command

     summary(glm(y~x+z, family=binomial))

fits a logistic regression model, computes some summary information and returns an object of class "summary.glm" (see How should I write summary methods?).

If you type `1+1' or `summary(glm(y~x+z, family=binomial))' at the command line the returned value is automatically printed (unless it is invisible()), but in other circumstances, such as in a source()d file or inside a function it isn't printed unless you specifically print it.

To print the value use

     print(1+1)

or

     print(summary(glm(y~x+z, family=binomial)))

instead, or use source(file, echo=TRUE).


Next: , Previous: Why is the output not printed when I source() a file?, Up: R Miscellanea

7.17 Why does outer() behave strangely with my function?

As the help for outer() indicates, it does not work on arbitrary functions the way the apply() family does. It requires functions that are vectorized to work elementwise on arrays. As you can see by looking at the code, outer(x, y, FUN) creates two large vectors containing every possible combination of elements of x and y and then passes this to FUN all at once. Your function probably cannot handle two large vectors as parameters.

If you have a function that cannot handle two vectors but can handle two scalars, then you can still use outer() but you will need to wrap your function up first, to simulate vectorized behavior. Suppose your function is

     foo <- function(x, y, happy) {
       stopifnot(length(x) == 1, length(y) == 1) # scalars only!
       (x + y) * happy
     }

If you define the general function

     wrapper <- function(x, y, my.fun, ...) {
       sapply(seq(along = x), FUN = function(i) my.fun(x[i], y[i], ...))
     }

then you can use outer() by writing, e.g.,

     outer(1:4, 1:2, FUN = wrapper, my.fun = foo, happy = 10)


Next: , Previous: Why does outer() behave strangely with my function?, Up: R Miscellanea

7.18 Why does the output from anova() depend on the order of factors in the model?

In a model such as ~A+B+A:B, R will report the difference in sums of squares between the models ~1, ~A, ~A+B and ~A+B+A:B. If the model were ~B+A+A:B, R would report differences between ~1, ~B, ~A+B, and ~A+B+A:B . In the first case the sum of squares for A is comparing ~1 and ~A, in the second case it is comparing ~B and ~B+A. In a non-orthogonal design (i.e., most unbalanced designs) these comparisons are (conceptually and numerically) different.

Some packages report instead the sums of squares based on comparing the full model to the models with each factor removed one at a time (the famous `Type III sums of squares' from SAS, for example). These do not depend on the order of factors in the model. The question of which set of sums of squares is the Right Thing provokes low-level holy wars on R-help from time to time.

There is no need to be agitated about the particular sums of squares that R reports. You can compute your favorite sums of squares quite easily. Any two models can be compared with anova(model1, model2), and drop1(model1) will show the sums of squares resulting from dropping single terms.


Next: , Previous: Why does the output from anova() depend on the order of factors in the model?, Up: R Miscellanea

7.19 How do I produce PNG graphics in batch mode?

Under a Unix-alike, if your installation supports the type="cairo" option to the png() device there should be no problems, and the default settings should just work. This option is not available for versions of R prior to 2.7.0, or without support for cairo. From R 2.7.0 png() by default uses the Quartz device on Mac OS X, and that too works in batch mode.

Earlier versions of the png() device uses the X11 driver, which is a problem in batch mode or for remote operation. If you have Ghostscript you can use bitmap(), which produces a PostScript or PDF file then converts it to any bitmap format supported by Ghostscript. On some installations this produces ugly output, on others it is perfectly satisfactory. Many systems now come with Xvfb from X.Org (possibly as an optional install), which is an X11 server that does not require a screen; and there is the GDD package from CRAN, which produces PNG, JPEG and GIF bitmaps without X11.


Next: , Previous: How do I produce PNG graphics in batch mode?, Up: R Miscellanea

7.20 How can I get command line editing to work?

The Unix command-line interface to R can only provide the inbuilt command line editor which allows recall, editing and re-submission of prior commands provided that the GNU readline library is available at the time R is configured for compilation. Note that the `development' version of readline including the appropriate headers is needed: users of Linux binary distributions will need to install packages such as libreadline-dev (Debian) or readline-devel (Red Hat).


Next: , Previous: How can I get command line editing to work?, Up: R Miscellanea

7.21 How can I turn a string into a variable?

If you have

     varname <- c("a", "b", "d")

you can do

     get(varname[1]) + 2

for

     a + 2

or

     assign(varname[1], 2 + 2)

for

     a <- 2 + 2

or

     eval(substitute(lm(y ~ x + variable),
                     list(variable = as.name(varname[1]))))

for

     lm(y ~ x + a)

At least in the first two cases it is often easier to just use a list, and then you can easily index it by name

     vars <- list(a = 1:10, b = rnorm(100), d = LETTERS)
     vars[["a"]]

without any of this messing about.


Next: , Previous: How can I turn a string into a variable?, Up: R Miscellanea

7.22 Why do lattice/trellis graphics not work?

The most likely reason is that you forgot to tell R to display the graph. Lattice functions such as xyplot() create a graph object, but do not display it (the same is true of ggplot2 graphics, and Trellis graphics in S-Plus). The print() method for the graph object produces the actual display. When you use these functions interactively at the command line, the result is automatically printed, but in source() or inside your own functions you will need an explicit print() statement.


Next: , Previous: Why do lattice/trellis graphics not work?, Up: R Miscellanea

7.23 How can I sort the rows of a data frame?

To sort the rows within a data frame, with respect to the values in one or more of the columns, simply use order() (e.g., DF[order(DF$a, DF[["b"]]), ] to sort the data frame DF on columns named a and b).


Next: , Previous: How can I sort the rows of a data frame?, Up: R Miscellanea

7.24 Why does the help.start() search engine not work?

The browser-based search engine in help.start() utilizes a Java applet. In order for this to function properly, a compatible version of Java must installed on your system and linked to your browser, and both Java and JavaScript need to be enabled in your browser.

There have been a number of compatibility issues with versions of Java and of browsers. See Enabling search in HTML help, for further details.


Next: , Previous: Why does the help.start() search engine not work?, Up: R Miscellanea

7.25 Why did my .Rprofile stop working when I updated R?

Did you read the NEWS file? For functions that are not in the base package you need to specify the correct package namespace, since the code will be run before the packages are loaded. E.g.,

     ps.options(horizontal = FALSE)
     help.start()

needs to be

     grDevices::ps.options(horizontal = FALSE)
     utils::help.start()

(graphics::ps.options(horizontal = FALSE) in R 1.9.x).


Next: , Previous: Why did my .Rprofile stop working when I updated R?, Up: R Miscellanea

7.26 Where have all the methods gone?

Many functions, particularly S3 methods, are now hidden in namespaces. This has the advantage that they cannot be called inadvertently with arguments of the wrong class, but it makes them harder to view.

To see the code for an S3 method (e.g., [.terms) use

     getS3method("[", "terms")

To see the code for an unexported function foo() in the namespace of package "bar" use bar:::foo. Don't use these constructions to call unexported functions in your own code—they are probably unexported for a reason and may change without warning.


Next: , Previous: Where have all the methods gone?, Up: R Miscellanea

7.27 How can I create rotated axis labels?

To rotate axis labels (using base graphics), you need to use text(), rather than mtext(), as the latter does not support par("srt").

     ## Increase bottom margin to make room for rotated labels
     par(mar = c(7, 4, 4, 2) + 0.1)
     ## Create plot with no x axis and no x axis label
     plot(1 : 8, xaxt = "n",  xlab = "")
     ## Set up x axis with tick marks alone
     axis(1, labels = FALSE)
     ## Create some text labels
     labels <- paste("Label", 1:8, sep = " ")
     ## Plot x axis labels at default tick marks
     text(1:8, par("usr")[3] - 0.25, srt = 45, adj = 1,
          labels = labels, xpd = TRUE)
     ## Plot x axis label at line 6 (of 7)
     mtext(1, text = "X Axis Label", line = 6)

When plotting the x axis labels, we use srt = 45 for text rotation angle, adj = 1 to place the right end of text at the tick marks, and xpd = TRUE to allow for text outside the plot region. You can adjust the value of the 0.25 offset as required to move the axis labels up or down relative to the x axis. See ?par for more information.

Also see Figure 1 and associated code in Paul Murrell (2003), “Integrating grid Graphics Output with Base Graphics Output”, R News, 3/2, 7–12.


Next: , Previous: How can I create rotated axis labels?, Up: R Miscellanea

7.28 Why is read.table() so inefficient?

By default, read.table() needs to read in everything as character data, and then try to figure out which variables to convert to numerics or factors. For a large data set, this takes considerable amounts of time and memory. Performance can substantially be improved by using the colClasses argument to specify the classes to be assumed for the columns of the table.


Next: , Previous: Why is read.table() so inefficient?, Up: R Miscellanea

7.29 What is the difference between package and library?

A package is a standardized collection of material extending R, e.g. providing code, data, or documentation. A library is a place (directory) where R knows to find packages it can use (i.e., which were installed). R is told to use a package (to “load” it and add it to the search path) via calls to the function library. I.e., library() is employed to load a package from libraries containing packages.

See R Add-On Packages, for more details. See also Uwe Ligges (2003), “R Help Desk: Package Management”, R News, 3/3, 37–39.


Next: , Previous: What is the difference between package and library?, Up: R Miscellanea

7.30 I installed a package but the functions are not there

To actually use the package, it needs to be loaded using library().

See R Add-On Packages and What is the difference between package and library? for more information.


Next: , Previous: I installed a package but the functions are not there, Up: R Miscellanea

7.31 Why doesn't R think these numbers are equal?

The only numbers that can be represented exactly in R's numeric type are integers and fractions whose denominator is a power of 2. Other numbers have to be rounded to (typically) 53 binary digits accuracy. As a result, two floating point numbers will not reliably be equal unless they have been computed by the same algorithm, and not always even then. For example

     R> a <- sqrt(2)
     R> a * a == 2
     [1] FALSE
     R> a * a - 2
     [1] 4.440892e-16

The function all.equal() compares two objects using a numeric tolerance of .Machine$double.eps ^ 0.5. If you want much greater accuracy than this you will need to consider error propagation carefully.

For more information, see e.g. David Goldberg (1991), “What Every Computer Scientist Should Know About Floating-Point Arithmetic”, ACM Computing Surveys, 23/1, 5–48, also available via http://docs.sun.com/source/806-3568/ncg_goldberg.html.

To quote from “The Elements of Programming Style” by Kernighan and Plauger:

10.0 times 0.1 is hardly ever 1.0.


Next: , Previous: Why doesn't R think these numbers are equal?, Up: R Miscellanea

7.32 How can I capture or ignore errors in a long simulation?

Use try(), which returns an object of class "try-error" instead of an error, or preferably tryCatch(), where the return value can be configured more flexibly. For example

     beta[i,] <- tryCatch(coef(lm(formula, data)),
                          error = function(e) rep(NaN, 4))

would return the coefficients if the lm() call succeeded and would return c(NaN, NaN, NaN, NaN) if it failed (presumably there are supposed to be 4 coefficients in this example).


Next: , Previous: How can I capture or ignore errors in a long simulation?, Up: R Miscellanea

7.33 Why are powers of negative numbers wrong?

You are probably seeing something like

     R> -2^2
     [1] -4

and misunderstanding the precedence rules for expressions in R. Write

     R> (-2)^2
     [1] 4

to get the square of -2.

The precedence rules are documented in ?Syntax, and to see how R interprets an expression you can look at the parse tree

     R> as.list(quote(-2^2))
     [[1]]
     `-`
     
     [[2]]
     2^2


Next: , Previous: Why are powers of negative numbers wrong?, Up: R Miscellanea

7.34 How can I save the result of each iteration in a loop into a separate file?

One way is to use paste() (or sprintf()) to concatenate a stem filename and the iteration number while file.path() constructs the path. For example, to save results into files result1.rda, ..., result100.rda in the subdirectory Results of the current working directory, one can use

     for(i in 1:100) {
       ## Calculations constructing "some_object" ...
       fp <- file.path("Results", paste("result", i, ".rda", sep = ""))
       save(list = "some_object", file = fp)
     }


Next: , Previous: How can I save the result of each iteration in a loop into a separate file?, Up: R Miscellanea

7.35 Why are p-values not displayed when using lmer()?

Doug Bates has kindly provided an extensive response in a post to the r-help list, which can be reviewed at https://stat.ethz.ch/pipermail/r-help/2006-May/094765.html.


Next: , Previous: Why are p-values not displayed when using lmer()?, Up: R Miscellanea

7.36 Why are there unwanted borders, lines or grid-like artifacts when viewing a plot saved to a PS or PDF file?

This can occur when using functions such as polygon(), filled.contour(), image() or other functions which may call these internally. In the case of polygon(), you may observe unwanted borders between the polygons even when setting the border argument to NA or "transparent".

The source of the problem is the PS/PDF viewer when the plot is anti-aliased. The details for the solution will be different depending upon the viewer used, the operating system and may change over time. For some common viewers, consider the following:

Acrobat Reader (cross platform)
There are options in Preferences to enable/disable text smoothing, image smoothing and line art smoothing. Disable line art smoothing.
Preview (Mac OS X)
There is an option in Preferences to enable/disable anti-aliasing of text and line art. Disable this option.
GSview (cross platform)
There are settings for Text Alpha and Graphics Alpha. Change Graphics Alpha from 4 bits to 1 bit to disable graphic anti-aliasing.
gv (Linux/Unix X)
There is an option to enable/disable anti-aliasing. Disable this option.
Evince (Linux/GNOME)
There is not an option to disable anti-aliasing in this viewer.
Okular (Linux/KDE)
There is not an option in the GUI to enable/disable anti-aliasing. From a console command line, use:
          $ kwriteconfig --file okularpartrc --group 'Dlg Performance' \
                         --key TextAntialias Disabled
     

Then restart Okular. Change the final word to `Enabled' to restore the original setting.


Previous: Why are there unwanted borders, Up: R Miscellanea

7.37 Why does backslash behave strangely inside strings?

This question most often comes up in relation to file names (see How do file names work in Windows?) but it also happens that people complain that they cannot seem to put a single `\' character into a text string unless it happens to be followed by certain other characters.

To understand this, you have to distinguish between character strings and representations of character strings. Mostly, the representation in R is just the string with a single or double quote at either end, but there are strings that cannot be represented that way, e.g., strings that themselves contains the quote character. So

     > str <- "This \"text\" is quoted"
     > str
     [1] "This \"text\" is quoted"
     > cat(str, "\n")
     This "text" is quoted

The escape sequences `\"' and `\n' represent a double quote and the newline character respectively. Printing text strings, using print() or by typing the name at the prompt will use the escape sequences too, but the cat() function will display the string as-is. Notice that `"\n"' is a one-character string, not two; the backslash is not actually in the string, it is just generated in the printed representation.

     > nchar("\n")
     [1] 1
     > substring("\n", 1, 1)
     [1] "\n"

So how do you put a backslash in a string? For this, you have to escape the escape character. I.e., you have to double the backslash. as in

     > cat("\\n", "\n")
     \n

Some functions, particularly those involving regular expression matching, themselves use metacharacters, which may need to be escaped by the backslash mechanism. In those cases you may need a quadruple backslash to represent a single literal one.

In versions of R up to 2.4.1 an unknown escape sequence like `\p' was quietly interpreted as just `p'. Current versions of R emit a warning.


Next: , Previous: R Miscellanea, Up: Top

8 R Programming


Next: , Previous: R Programming, Up: R Programming

8.1 How should I write summary methods?

Suppose you want to provide a summary method for class "foo". Then summary.foo() should not print anything, but return an object of class "summary.foo", and you should write a method print.summary.foo() which nicely prints the summary information and invisibly returns its object. This approach is preferred over having summary.foo() print summary information and return something useful, as sometimes you need to grab something computed by summary() inside a function or similar. In such cases you don't want anything printed.


Next: , Previous: How should I write summary methods?, Up: R Programming

8.2 How can I debug dynamically loaded code?

Roughly speaking, you need to start R inside the debugger, load the code, send an interrupt, and then set the required breakpoints.

See Finding entry points in dynamically loaded code.


Next: , Previous: How can I debug dynamically loaded code?, Up: R Programming

8.3 How can I inspect R objects when debugging?

The most convenient way is to call R_PV from the symbolic debugger.

See Inspecting R objects when debugging.


Next: , Previous: How can I inspect R objects when debugging?, Up: R Programming

8.4 How can I change compilation flags?

Suppose you have C code file for dynloading into R, but you want to use R CMD SHLIB with compilation flags other than the default ones (which were determined when R was built).

Starting with R 2.1.0, users can provide personal Makevars configuration files in $HOME/.R to override the default flags. See Add-on packages.

For earlier versions of R, you could change the file R_HOME/etc/Makeconf to reflect your preferences, or (at least for systems using GNU Make) override them by the environment variable MAKEFLAGS. See Creating shared objects.


Previous: How can I change compilation flags?, Up: R Programming

8.5 How can I debug S4 methods?

Use the trace() function with argument signature= to add calls to the browser or any other code to the method that will be dispatched for the corresponding signature. See ?trace for details.


Next: , Previous: R Programming, Up: Top

9 R Bugs


Next: , Previous: R Bugs, Up: R Bugs

9.1 What is a bug?

If R executes an illegal instruction, or dies with an operating system error message that indicates a problem in the program (as opposed to something like “disk full”), then it is certainly a bug. If you call .C(), .Fortran(), .External() or .Call() (or .Internal()) yourself (or in a function you wrote), you can always crash R by using wrong argument types (modes). This is not a bug.

Taking forever to complete a command can be a bug, but you must make certain that it was really R's fault. Some commands simply take a long time. If the input was such that you know it should have been processed quickly, report a bug. If you don't know whether the command should take a long time, find out by looking in the manual or by asking for assistance.

If a command you are familiar with causes an R error message in a case where its usual definition ought to be reasonable, it is probably a bug. If a command does the wrong thing, that is a bug. But be sure you know for certain what it ought to have done. If you aren't familiar with the command, or don't know for certain how the command is supposed to work, then it might actually be working right. For example, people sometimes think there is a bug in R's mathematics because they don't understand how finite-precision arithmetic works. Rather than jumping to conclusions, show the problem to someone who knows for certain. Unexpected results of comparison of decimal numbers, for example 0.28 * 100 != 28 or 0.1 + 0.2 != 0.3, are not a bug. See Why doesn't R think these numbers are equal?, for more details.

Finally, a command's intended definition may not be best for statistical analysis. This is a very important sort of problem, but it is also a matter of judgment. Also, it is easy to come to such a conclusion out of ignorance of some of the existing features. It is probably best not to complain about such a problem until you have checked the documentation in the usual ways, feel confident that you understand it, and know for certain that what you want is not available. If you are not sure what the command is supposed to do after a careful reading of the manual this indicates a bug in the manual. The manual's job is to make everything clear. It is just as important to report documentation bugs as program bugs. However, we know that the introductory documentation is seriously inadequate, so you don't need to report this.

If the online argument list of a function disagrees with the manual, one of them must be wrong, so report the bug.


Previous: What is a bug?, Up: R Bugs

9.2 How to report a bug

When you decide that there is a bug, it is important to report it and to report it in a way which is useful. What is most useful is an exact description of what commands you type, starting with the shell command to run R, until the problem happens. Always include the version of R, machine, and operating system that you are using; type version in R to print this.

The most important principle in reporting a bug is to report facts, not hypotheses or categorizations. It is always easier to report the facts, but people seem to prefer to strain to posit explanations and report them instead. If the explanations are based on guesses about how R is implemented, they will be useless; others will have to try to figure out what the facts must have been to lead to such speculations. Sometimes this is impossible. But in any case, it is unnecessary work for the ones trying to fix the problem.

For example, suppose that on a data set which you know to be quite large the command

     R> data.frame(x, y, z, monday, tuesday)

never returns. Do not report that data.frame() fails for large data sets. Perhaps it fails when a variable name is a day of the week. If this is so then when others got your report they would try out the data.frame() command on a large data set, probably with no day of the week variable name, and not see any problem. There is no way in the world that others could guess that they should try a day of the week variable name.

Or perhaps the command fails because the last command you used was a method for "["() that had a bug causing R's internal data structures to be corrupted and making the data.frame() command fail from then on. This is why others need to know what other commands you have typed (or read from your startup file).

It is very useful to try and find simple examples that produce apparently the same bug, and somewhat useful to find simple examples that might be expected to produce the bug but actually do not. If you want to debug the problem and find exactly what caused it, that is wonderful. You should still report the facts as well as any explanations or solutions. Please include an example that reproduces (e.g., http://en.wikipedia.org/wiki/Reproducibility) the problem, preferably the simplest one you have found.

Invoking R with the --vanilla option may help in isolating a bug. This ensures that the site profile and saved data files are not read.

Before you actually submit a bug report, you should check whether the bug has already been reported and/or fixed. First, try the “Search Existing Reports” facility in the Bug Tracking page at http://bugs.R-project.org/. Second, consult https://svn.R-project.org/R/trunk/NEWS, which records changes that will appear in the next release of R, including some bug fixes that do not appear in Bug Tracking. (Windows users should additionally consult https://svn.R-project.org/R/trunk/src/gnuwin32/CHANGES.) Third, if possible try the current r-patched or r-devel version of R. If a bug has already been reported or fixed, please do not submit further bug reports on it. Finally, check carefully whether the bug is with R, or a contributed package. Bug reports on contributed packages should be sent first to the package maintainer, and only submitted to the R-bugs repository by package maintainers, mentioning the package in the subject line.

On Unix systems a bug report can be generated using the function bug.report(). This automatically includes the version information and sends the bug to the correct address. Alternatively the bug report can be emailed to R-bugs@R-project.org or submitted to the Web page at http://bugs.R-project.org/. Please try including results of sessionInfo() in your bug report.

There is a section of the bug repository for suggestions for enhancements for R labelled `wishlist'. Suggestions can be submitted in the same ways as bugs, but please ensure that the subject line makes clear that this is for the wishlist and not a bug report, for example by starting with `Wishlist:'.

Comments on and suggestions for the Windows port of R should be sent to R-windows@R-project.org.

Corrections to and comments on message translation should be sent to the last translator (listed at the top of the appropriate `.po' file) or to the translation team as listed at http://developer.R-project.org/TranslationTeams.html.


Previous: R Bugs, Up: Top

10 Acknowledgments

Of course, many many thanks to Robert and Ross for the R system, and to the package writers and porters for adding to it.

Special thanks go to Doug Bates, Peter Dalgaard, Paul Gilbert, Stefano Iacus, Fritz Leisch, Jim Lindsey, Thomas Lumley, Martin Maechler, Brian D. Ripley, Anthony Rossini, and Andreas Weingessel for their comments which helped me improve this FAQ.

More to come soon ...